10 Common Forest river RV slide-out problems and how to fix them.
If your slide-out is not working, you are likely to be experiencing one of the following problems. Here is a list of common problems with Forest river RV slide outs and how to fix them:
1. My Slideout won’t retract back in.
The retraction system for your Forest river slide-out may have an arm broken or bent, preventing it from returning completely into the cavity of your RV.
To resolve this issue, you will need to remove everything in that area that might get in the way when you try to take off/put on the parts that need replacing. You should be able to find replacement parts at any local rv dealer (if they don’t carry it, they can order it for you).
2. My Slideout won’t extend out.
The extension system for your Forest river slide-out may have an arm broken or bent, preventing it from extending completely past the cavity of your RV.
Replacing this part is similar to replacing the retraction mechanism, but in some cases, you will need to remove more components than just what gets in the way when removing/installing parts.
3. My Forest river slide-out is not level with the ground
If the legs are adjusted on your Forest river slide-out too low, it can prevent it from leveling down to comply with local codes while ensuring that door seals stay sealed while traveling and cargo.
If levels are too high, you can experience a few problems; first, rainwater or melted snow will pool up to where the slide-out meets the ground and eventually work its way into your RV.
The second is rust from water getting trapped in those areas.
To resolve this, adjust your slide-out parts so they are adjusted properly for level travel.
Video Overview: RV Slide Out Adjustment Alliance Paradigm 370FB
4. My Forest river Slide-out floor is not flat
If any of the components on your Forest river slide-out have been damaged, then it may not lay completely flat against the bottom side of your RV, causing a potential trip hazard and malfunction with door seals that stay open while traveling or cargo that slides around when moving.
If you suspect damage to parts, you should replace them as soon as you can.
> You may also like:Worst 5th Wheel Brands to Avoid <<
5. My Forest river Slide out is making a loud noise when extending/retracting
If your slide-out is not level, it may cause unnecessary friction and pressure on the system, causing damage and allowing water to pool under the slide-out, which will lead to rusting and corrosion of your parts if they become wet all the time.
If you feel this problem occurs due to unlevel travel, then compare sides for any differences before further adjustment or replacement of parts becomes necessary.
6. My Forest river slide out has stopped working completely
Some people experience an electrical issue with their extension/retraction system that can be resolved by replacing all electrical components in that specific area (relays, motors, etc.) depending on how many components are faulty.
7. My Forest river Slide-out floor has collapsed
If your slide-out has collapsed due to neglect of proper care, you can resolve this problem by replacing damaged parts with new ones as soon as possible. If the damage is too extensive, it may be necessary to replace the entire mechanism itself depending on how much corrosion or rusting there is and if additional support beams have been compromised.
In most cases, this will solve the issue completely. You should, however, check for any other potential problems that could cause a collapse in addition to normal wear and tear, such as water damage from bad seals, broken parts, etc.
8. My Forest river Slide-out does not stay open when I want it open.
If you do not have a door seal that keeps the slide-out open when desired, a door seal repair kit should resolve this problem completely.
You can also try adjusting your slide-out, so it’s not as much of an inconvenience to have it open for extended periods.
9. My Forest river Slide-out will only close halfway
In cases where one side is retracting/extending slower than the other or if your slide-out won’t stay retracted or extended properly, a broken part may interfere with the smooth operation of the system, preventing full retraction or extension from occurring.
In this case, it may be necessary to replace parts until all mechanisms are running smoothly and.
> You may also like:Gas vs Diesel For Towing a Fifth Wheel?<<
10. My Forest river Slide-out will not retract/extend
If you have gone through all the previous steps and your slide-out still does not move, then there may be a problem with the hydraulics of your system, and it could require replacement.
If you believe this to be the case, contact Forest river directly to find out if they will cover any costs for replacement under warranty if it turned out to be an issue caused by manufacturing problems.
Why Is My RV slide-out not working? Troubleshooting.
If you’ve just bought a Forest River RV, the slide-out may not work properly and need to be adjusted. If your slide-out is malfunctioning or broken, there are ways to troubleshoot and fix the problem before asking for assistance from a dealer shop if possible.
All issues can be resolved by adjusting all parts so they are level and no damage has occurred to any critical components that would cause further problems such as rusting or corrosion.
Video Overview: Troubleshooting Slider Electric System – How To RV: Camping World
How do you adjust a forest river slide out?
To adjust something on your Forest river RV Slide out the system first; make sure everything is level side to side and front to back, using only small adjustments at first in either direction until it’s perfect. If this doesn’t resolve your issue, it may be necessary to physically check the slide-out components for damage or wear and tear that could make them malfunction.
How do you manually retract a slide out?
To manually retract your Forest river RV Slideout, first, make sure all parts are level side to side as well as front to back, using only small adjustments at first in either direction until it’s perfect.
Once this step is complete, start by checking your batteries which should be fully charged, before moving any parts of the system. If there is no power, you will need assistance from someone with more knowledge or contact an authorized dealer shop.
Ensure the emergency brake is on correctly without being too tight or too loose, depending on your needs.
If everything checks out and you still can’t move your slide-out in either direction, then it may be necessary to contact an authorized dealer.
Video Overview: How To Override Your Slide Out Mechanism
How do I reset my RV slide out?
If you have gone through all the previous steps and your Forest river Slide out is still not working properly, attempt to reset the system by turning off all power sources at the breaker box. This should normally solve any issues with a malfunctioning board or computer that could prevent further movement of your slide-outs.
Once this has been done, turn everything back on again one item at a time and cycle through each component until you find which one turns your slide-out on and off when activated.
Turn them all back off again by switching the individual breakers to the off position until only the one that controls your slide-out remains on.
Once this is done, turn it back on while sliding out or retracting slowly, and you should have complete movement of your slide-out.
> You may also like:How To Insulate an RV Underbelly? In 5 Easy Steps.<<