Best 12 Volt RV Water Pump in 2018
Ever since this invention came to limelight, there have been different models of the 12 Volt Water Pump with each coming with either different perks or an improvement on the existing ones. This variety has enabled each buyer to choose whichever Water Pump that tickles their fancy.
While it’s noteworthy that all the variants of the 12 Volt RV Water Pump are electric by nature, they vary in functions and prices as well.
This 12 Volt RV Water Pump costs around 110 dollars, though relative in price. It doesn’t have many fixtures like its successors, but it sure will give you a run for your money
Shurflo 4048 12 Volt RV Water Pump is a bit advanced than 4008 in that it pumps water in high volume—at least more than its predecessor. It pumps 3 gallons of water per minute. What an improvement! The following are its other features.
- It runs dry without damage
- It has a built-in check valve that disallows water from backflowing
- It has smart sensor pumps, which aids rapid water pumps
- It runs on 12 Volts at a maximum speed of 10 amperes
- It has a rugged design that is intended to put in check technical complications
- It is eco-friendly in that it reduces hazardous waste despite its efficiency.
>> You may also like: How to winterize RV without antifreeze?<<
Remco 55-Aqua Jet:
This was built with an excess speed than Shurflo 4048 to nip the growing impatience of water pump users. The following are its features:
It has an adjustable speed as its water fixtures are opened
- As against its predecessors’ built, it has a 5-valve design which enables it to function faster than the conventional RV industry pump
- It allows its several fixtures to operate concurrently without dropping its efficiency rate
- It delivers 3.5 gallons per minute flow rate
- Its state-of-the-art fixtures allow its industry-domination and preference over its subordinate conventional pumps.
1. How to get running water in your RV?
There are two ways in which you can get water flowing into your RV pipes:
– You can use city water by attaching a hose to your RV from the outside
– You can use fresh water from your own tank
Using City Water
Using city water’ is the name given to the method by which one connects an outside water source to the RV tube. Since water comes directly from a source outside the RV, there is no need to use your own personal water tank. The water just goes straight from the source to the faucets in the RV via tubes. Using city water eliminates the need for opening or closing the water supply and you can simply have the supply on at all times. However, such sources of water are not readily available everywhere. This brings us to the second method, using fresh water.
Using Fresh Water
Most RVs that come equipped with toilets and showers also have a built-in water tank. This water tank comes in handy when you are not near an external source of water. The tank can either be filled at home, or at the place where you plan to take the RV. Most campsites offer a place where people can come fill water.
Video Overview: RV Walk-Thru: Water Systems – Learn how the water systems work on your RV
2. How to find water to fill your RV water tank?
Finding a place to fill up your RV water tank can be difficult if you’re not at a campsite or at home. However, there are some websites which can help you locate places which offer water. www.sanidumps.com is one such website. Other than dump sites, some gas stations also offer free water where you can easily fill up your tank. If you’re willing to pay for water, some campgrounds offer their services at a cost.
3. How does your RV water pump get power?
The pump requires 12 Volts to function so it can easily be powered by your RV’s batteries which provide it with the required 12 Volts. When connected to a 120-volt source, the RV converter converts the energy into 12 Volt power which is then used to run the pump.
Video Overview: RV Water Pump Troubleshooting
4. Filtering your fresh water
Tiny particles in water can often cause malfunctions or restrict your pump from functioning properly. Therefore, it is essential to filter the water going into the pump. Water can be filtered using filters which are readily available in the market. The filter can be attached between the water source and the RV.
>> You may also like: Worst 5th Wheel Brands to Avoid <<
5. Disinfecting your freshwater tank
It can be a good idea to disinfect your water tank especially if you intend on drinking water from the tank. Although some people suggest against the use of bleach to clean the tank, it is recommended by the manufacturers of some RVs so you can use it.
6. Buying a new RV water pump
When buying a new water pump for your RV, there are a few important factors to consider:
– GPM (gallons per minute)
– PSI (pounds per square inch) which is a measurement of the water pressure
7. Installing a new 12 Volt RV water pump
The first thing to do is to make sure the battery is powered off and to open the faucets. Then, you can simply follow the instructions given in the manual for the pump.
In Conclusion, while the 12 Volt RV Water Pump is affordable with each of its variants’ price ranging from 58-120 dollars, a proper examination of a faulty water pump—in a bid to fixing it by following the appropriate guideline by the manufacturer– would save one a lot of time and money.
Video Overview: How to install a new 12 Volt water pump in your RV or boat
> You may also like:45 RV Accessory Must-Haves for Your Travel Trailer<<
Do you leave your RV water pump always on or turn it off unless you need it?
The RV Water Pump on your RV can be always turned on in order to receive water from the fresh water holding tank which is available on board. It does not need to be connected to city water in order to turn it on continuously.
The former type of pump only needs to work on certain instances- like when the toilet needs flushing or when a faucet needs to be turned on. The former type of pump typically does need annual maintenance so that it can be used in parallel with city water.